The interior skin is installed. There’s a lot of bracing in the front because two end pieces butt on a tight curve. They really don’t like that. 
Before I put on the skin, I had to take one last picture of the front, looking into the storage area. Look how many different elements all come together in this one place. 
The front with the ribs installed. Those odd blocks of wood will be removed once the glue dries. 
Dad custom made aluminum trim to cover where the three strips of roof liner join. The screws go into the ribs on the outside. 
The aluminum trim looks great, and I think it adds to the structural integrity.
Interior Roof Liner Done!
Multitasking Time!
This has been a week of keeping multiple plates spinning as we near the end of the build. Electrical, roof liner, and cabinetry are all coming together.
These wheel extensions move the tires a bit further away from the exterior wall of the trailer. 
Here I’ve made neoprene gaskets for some of the wires that go through the walls to power the running lights. 
Wiring routed under the bed platform and well guarded from getting knocked about by storage. 
Galley light switch and usb ports. 
I built a fantastic jig for holding the cabinet doors for sanding. 
These ribs help form the roof, along with the map to tell me where they go. 
Getting the first two strips of the roof liner glued down. 
The beginning of the wiring that will power all the running lights and turn signals.
Rush Week
There was a hopeful plan where we wrapped up the major elements of the build in 11 days. Just a few days into this full-on build we realized it to be too ambitious. More than the physical challenges, it was the mental wear and tear that brought me down. Each step at this stage generally requires learning a new building technique, then applying it to some critical component of the build where there is no going back. It just about broke my brain.
So, we are taking a methodological approach, and hope to get the Betty Mobile road-ready by the first week in October.
We did a dry fit of the inner roof skin and bed platform. 
Getting an idea of what the inside will be like once all the pieces are in place. 
Something didn’t quite work with the CNC routing for the galley hatch ribs, so I had to make them from scratch. 
The typical view of the shop table. 
The weather has been great, so we took the Betty Mobile on her first trip out of the garage – about 20 feet! 
Dry fitting the galley hatch. Turns out the struts we bought to lift and hold the hatch won’t work. I guess that’s what dry-fitting is for.
We love you, Sitka!
Good gracious, I can’t believe it’s already been TEN DAYS since we left Sitka! I feel like I’m in one of those cartoons where the days are just flying off the calendar.
It was FANTASTIC to be back in Sitka. So nice to feel that fresh, cool Alaska air, see the beautiful mountains and islands, catch up with our friends, and check in on our little houses. We played some music, took nice walks, ate delicious meals, had so much great conversation, gave and received oh-so-many hugs, and soaked up as much as we could from our sweet town. Matthew got out to our friend’s cabin for a little kayaking one day, and I got to do a radio show!
Our little houses are doing very well! 
If you look closely, you can see many types of ocean vessel in this photo: cruise ship, kayak, and several types of fishing boat. 
I got back on the radio! So fun to host a show again. 
Lots of quality time with Grace and Charlie’s fur babies: Melvin the cat and Chloe the dog. (Opal the cat was around, also, but she’s pretty shy…) 
Chloe in her most comfortable position. 
It was also nice to check in on Stevenson Hall – site of the 9-year fundraising and remodel project I was involved with. Look at those awesome windows!! 
Post-dinner walk around the block with Charlie, Grace, Cleo, & Scott, plus Oscar and Chloe. 
Ahhh … Sitka. We’ll be back again.
The main reason we *had* to go to Sitka was to do some plumbing work on our houses. (And by “we” I mean “Matthew”. I’m afraid I wasn’t much help on this project, but our friend Scott sure was!) The goal was to remap the crazy pipe route from this:
To this:
Notice in the “before” picture how the water for BOTH houses goes through the purple house first (after several crazy initial jigs and jags), then takes a long journey practically out to the ocean before heading into the shed, where the hot water heater for the purple house is located. Then the hot water goes back to the purple house while the rest of it goes through a filter in the shed, then over to the green house (where the hot water heater is located inside the house). Plus, it’s all 1/2″ copper pipes, which freeze easily unless watched hawkishly. Oh yeah, and we currently have no shut-off valve, so if anything were to burst, we have to call the city to shut off the water for our houses AND our neighbor’s.
The new plan is much more straight-forward: The main heads directly to the shed (via a new shut-off valve!), where all the water is filtered, then distributed appropriately to each house. Plus, we’re swapping out that copper for PEX pipes and wrapping them in heat tape and insulation.
This work involved spending many hours underneath the porch, often on rather cool and damp days.
Now we’re back in Virginia, making a big push on camper-building this week. One way or another, I need to get to Michigan by Monday night (9/19) to be with my sister for her next round of chemo. The ideal scenario would be to hook our little teardrop up to Twyla, load ’em both up with all our stuff, and use this trip to Michigan as the first leg west in our grand adventure! I’ll let Matthew give you the updates on that progress … stay tuned!
Hello from Alaska!
This photo was taken on a perfect sunny day in Juneau, and right now we’re in Sitka, sitting in the adorable kitchen of our friends Scott and Cleo, watching the gentle SE Alaska rain and listening to the backyard chickens fuss about their breakfast. It’s been fantastic to be back “home” for awhile. But more about that in a minute …
I guess it’s been awhile since you’ve heard anything from us besides camper building stories. There’s other stuff going on, too! First of all, let me say that I *love* my new job. (The one at the search firm, not the bartending job. Although that was fun, too, but between summer travels and camper-building, we needed to leave the bartending gig behind.) I’m working a few hours a day, keeping track of lots of details and having conversations with lots of smart, interesting people. I’m really grateful to have connected with this place and been given the opportunity to join their team. It’s definitely a big part of my week, and it’s so great that I’m able to bring the work with me and stay on top of it, even while we’re in Alaska!
Back in July, I went to Michigan for a couple of weeks to be with my sister Iris for her second round of chemo. She’s doing OK – her body seems to be tolerating the treatments as well as possible. There’s a lot of fatigue and frustration about how this changes her normal routine, but I really admire her courage, strength, and hopefulness. And I’m so glad to have the flexibility and availability to be able to spend time with her through this journey. While there, I overlapped for a couple of days with niece Sophia and her fella Brett – always excellent to spend time with them, too!
OH! And two rather AMAZING coincidences happened: 1) my flight to Michigan got cancelled, but a gate agent worked some magic and re-routed me through Philadelphia. Within 10 minutes I was sitting on a plane, texting my brother who lives 1/2 hr from PHL, and – hooray! – the timing was perfect for him to come pick me up to join them for dinner and crash at their house for the night before I continued on to Michigan the next day. 2) My college roommate and dear-friend-to-this-day, Emily, who now lives in NORWAY, just *happened* to come to a family memorial service in Grand Rapids while I was there! Fortunately she’d been tracking me enough to remember that I was in Michigan and we were able to have lunch together!
Here’s a few photos from my time in Michigan:
Spontaneous dinner in Paoli PA with my brother and sis-in-law: Kevin & Kristi. 
Gathering of Iris’ friends on the bluff of Lake Michigan, including beautiful music and Holden Evening Prayer to launch her into Round 2. 
Iris and me with our niece, Sophia, enjoying a beautiful walk in the woods that opens up to the beach. 
Sophia with Brett and the ever-adorable Olive. 
Refreshments at Guardian Brewery after our hike. 
Olive! 
Trimming the flora to make room for the USPS. 
Oh, how I love my Emily! We met 25 (!!) years ago as freshman roommates and we still manage to find each other at random points on the planet. 
Beautiful day for a walk near the Grand River. 
Iris has gotten so many cute hats! 
Sunset at the lake are always a peaceful way to end the day.
On August 14, we put down the camper project for a bit and set off on a 3-week trip to Juneau & Sitka. We spent 6 days in Juneau visiting several good friends; fortunately the weather was gorgeous, so we also got out on the trails a bit. Now we’re halfway through 2 weeks in Sitka, where we’re also enjoying lots of time with friends, but also doing a little plumbing project under our houses here. I haven’t been as good about taking photos, but here’s a few:
We took the train to DC and spent a day there before flying out. 
I love walking through all the monuments; the MLK Jr one is especially powerful. 
Lincoln’s Waffle Shop – a total dive diner with excellent waffles, located across the street from Ford’s Theater. Highly recommended! 
Juneau! Lots of people have been fooled into thinking photos of this sculpture downtown are a real whale. 🙂 
Nice little walk back Perseverance Trail. 
Live music at the recently-remodeled Viking Lounge (now called Crystal Saloon). 
Dinner on the porch with Steve & Jamie. 
Juneau is amazing on a sunny day, with its big mountains rising high above downtown. 
Awesome friend Jamie, getting a gentle love squeeze around his fractured shoulder. 
Cleo’s backyard chickens … as they roam around the yard … 
… and getting called back to the coop for the night.
All the Pieces Fit
We took some big steps in the past five days! All the cabinets are built and installed, and the sides are now permanently attached. We are on a bit of a time crunch to get the outside road-ready (more on that in an upcoming blog post) so we are saving some of the interior finishing, cabinetry, and painting for later.
The next big steps are: getting the interior roof liner put into place, wiring, and then the exterior skins and paint! We are up for some big challenges figuring out how to bend the roof skins to the teardrop shape. Going to be a big learning curve.
The photos below are grouped by camper component, so some of the pictures are out of sequence from the actual build order, but it is easier to get the idea of what has happened so far.
Routing out where the countertop and cabinets will fit. 
Glued in place. 
Marking where the galley fits in the camper. 
Gluing the base. 
Sliding it in. 
Perfect fit! 
Dad working out the locking slide drawers. 
This took a lot of figuring. 
Water and cooler lock in under the counter top. 
Drawers also lock when out.
Building the cabinets that make the headboard, and help form the forward curve of the camper. 
Once the shelves were done, we built a face board. There were lots of holes to drill. 
So many holes. 
Then making the cut outs. 
So much sanding. 
Attaching the face board with glue and… 
pocket screws! 
Oh yes, we love the pocket screws. 
The headboard cabinet dry-fit in the camper. 
And from the pretty side. Notice all the clamps. 
There is also a cabinet at our feet. 
More holes and cutouts. 
More pocket screws. 
Eventually, we will build sliding panels for this cabinet, and some of the storage in the headboard cabinet.
Postcards from the Camper Build
Building the floor. A plywood and styrofoam sandwich. 
Coating the underside of the floor where it will be exposed to the elements. 
Floor flipped and in place. There were some very specific measurements here. The wall edge will sit on this little plywood ledge. 
Once the floor was in place we could dry-fit the walls. They won’t be permanent until we build the cabinets. 
Inside view. 
Here’s a side view of how all the wall and floor layers fit together.
The Build Is Going To Move a Bit Faster Now…
Some exciting things happened last week, on the same day! We got our trailer, and I got covid*!
*Well, I didn’t get tested. What I got was a five-day illness with flu-like symptoms consistent with the symptoms of the covid pandemic.
So, as agonizing as the wait has been for getting the metal part of the camper manufactured so that the rest can be built on it, I still had to wait until this week to be able-bodied enough to do anything about it.
We took the trailer to a friend’s shop to get it painted, welded, and tired. I don’t think we could have knocked out the trailer to-do’s without him. So, please raise a glass to Ed Hammond at your next social gathering.
There were a few goofy things that happened during the trailer build. I’ll have another chapter of “Lessons Learned” regarding those pretty soon, but for now, I need to get out there and start building that camper!
Scenes from the Kitchen Table
I was hoping for a trailer for my birthday, but I guess I get to practice patience some more times. So, I thought I would dive into the electronics a bit. Just practicing my soldering and making sure the battery and circuits will handle what we are asking of it.
Fun With Styrofoam
All the walls and bottom use styrofoam as insulation. We needed to trim some it the correct thickness, so I created a dangerous tool to do it, using broken chair legs and NiChrome wire. You can also marvel at the great sound and camera work – sorry about that.
Then I take that cardboard out from under the styrofoam, and it fits perfectly!